5
Rear Panel
Memo Core
’
s output connection can be used to control DMX fixtures, video, and audio scenes on the Enlighten Soft-
ware.
1 2 3 4 5 6 7 8
1= DMX Output:
8 RJ45 output connections each representing a universe 512 DMX Channels.
2= RS485/RS232:
4 point Screw Terminal Port, used for connecting Memo Remote wall connection or any
other type of command device that will send or receive RS232 or RS485 Commands.
Pin 1 and 4 are used to send 12V Voltage.
Unit ships prewired for Memo Remote Con
nection. If RS232 or RS485 is needed please specify at ordering.
3= Ethernet:
RJ45 Connection used for internet connection that will allow for Remote Desk Top or
Web Remote control.
4= USB:
USB 3 connection typically used for keyboard and mouse connection.
5= HDMI Output:
Single Layer HD Video 1920x1080 @ 59fps max. Optimal File Bitrate 21000Kbs. Audio
imbedded HDMI connection type
(no file transitions)
6= Monitor:
HDMI output for software monitor view.
7= Fuse:
F2 240V 5x20mm Fuse
8= Power In:
Power Con type connection input voltage 100
-
240V AC50/60Hz (Proceed to page 4 for
power connection).
Memo Remote Connection
Memo Remote Installation:
Memo Remotes are designed to trigger the
preprograms created in the Enlighten Memo Core Software. For instruc-
tions on how to create programs, please visit the Enlightens You Tube
playlist.
1)
Memo Remote Units can be wired in Series, meaning they can be con-
nected from one fixture to another fixture.
2)
Memo Remote Units can be addressed to work the same as another
or as independent control interfaces. The fixture is equipped to be ad-
dressed to the same or different zone. Up to 8 different zones can be
assigned.
3)
For more information on the Memo Remote, please refer to the fixture
User Manual for Memo Remote.
