MegaLite axis xtra 17R, Руководство пользователя

Страница: 6 / 16

6
Main Power Connection
Caution!
1. Do not connect fixture to a dimmer system.
2. This unit must be earthed. (electronically grounded)
3. Replace fuse only with the specified type and rating.
The occupation of the connection - cable is as follows:
This device is equipped with a auto switching power supply that will allow you to work from 100V - 240V 50/60Hz
Caution!
At the last fixture the DMX signal needs to be terminated with a terminator. Solder a
120 Ohm resistor between the ( - ) and the (+) signal into a 5 pin XLR plug and plug it
in to the last fixture on the signal run. Pre - manufactured terminator plugs are availa-
ble for purchase from your Mega - Lite dealer (P - DMX - T).
Cable (USA) Cable (EU) Pin 110V
Black Brown
White
Green
Light Blue
Yellow/Green
Live
Neutral
Ground
L
N
L
L
220V
L
L
110V
Connec-
220V
Connec-
N
L
DMX - 512 Connection
The fixture is equipped with 3 and 5 pin XLR Sockets for DMX input and output. The sockets are wired in parallel. Only
use a shielded twisted pair cable designed for RS - 485 and 3 or 5 pin XLR plugs and connectors in order to connect the
controller with the fixture or the fixture with another.
DMX—Input
DMX—Output
1. Shield
2. Signal ( - )
3. Signal (+)
4. N/A
5. N/A
2
3
1
5
3
4
2
1
1 2
3
1
2
3
4
5