Function and light description
Press Catchmon button to switch between the different light functions.
Press once and go from blue light > green light > purple light in order. Switch
to the desired light option, then set up based on the instructions below.
※
Long press both buttons for 3s. Red light will flash several times and both sound
and vibration functions will be turned off.
Catchmon with a new phone, first delete previous connection
memory. After pressing and blue light comes on, long press
for 3s to disconnect.
When disconnecting, blue and yellow flashing light will appear in
Catchmon.
Disconnection successful: green light flashes
Disconnection unsuccessful: red light flashes
Blue light: to disconnect
Green light: sound on
Green breathing light: sound off
In green light display, press for 3s to switch off notification
sound setting.
Turned on: green light flashes
Turned off: red light flashes
Green light: notification sound switch
Purple light: vibration on
Purple breathing light: vibration off
In purple light display, press for 3s again to switch off
vibration setting.
Turned on: purple light flashes
Turned off: red light flashes
Purple light: vibration switch
※
Within 3min, connection status (sound & vibration) is prompted every 10s; between
3-10 min, every 30s;
longer than 10min, no prompted.
light
sound
status
vibration
Low battery
Awaiting bluetooth connection
Bluetooth connected /
Signal disconnected
Signal connection successful
Phone unable to connect
to Internet
NA
1P-beep~ twice ; 2P-beep beep~ twice
1P-beep~ twice ; 2P-beep beep~ twice
NA
beep~ triple
NA
single vibration twice
single vibration twice
NA
single vibration triple
Red flashes
Green
Blue
Purple
Red
connection status display
Light, sound and vibration description
light
sound
status
vibration
Within range of a PokeStop
A Pokemon is nearby
A Pokemon is nearby (haven't caught)
Catching Pokemon
Pokemon runs away.
Successfully catching a Pokemon or visiting a PokeStop
Item storage is full
Out of Pokeball
Out of range of the PokeStop
NA
NA
NA
NA
NA
NA
Beep~ triple
Beep beep beep~ triple
Beep beep~ triple
NA
NA
NA
NA
NA
NA
Singal vibration triple
Tri-vibration triple
Dual vibrataion triple
Blue
Green
Yellow
White
Red
Multicolor
White
Red
Red
Game status display
Additional Instructions
Pokemon app will automatically disconnect from Catchmon every hour. If not
reconnected after 10min, Catchmon will go into sleep mode. Player can
press Go Plus connection icon in app anytime and automatically call up
Catchmon to reconnect.When changing batteries, DualCatchmon will retain
all settings in memory so reset is not necessary.
Catchmon consumes very little power and has power-saving and sleep mode features.
Compatible with iphone 6 or higher devices with iOS Ver. 11 or higher installed.
Compatible with Android devices with 2 GB RAM or more. Bluetooth Smart (Bluetooth Ver. 4.0 or higher)
capability and Android Ver. 7.0 or higher installed.
Copyright © Sperry Corporation All Rights Reserved.
Dual Catchmon is the trademark of Sperry Corporation. Pokemon / PokemonGo / Pokemon Go Plus are the
trademarks of Nintendo. The other trademark names are the used marks, trademarks or registered
trademarks of the corresponding companies. This Product is not sponsored, endorsed, or approved by
Nintendo, ThePokémon Company Or Niantic.
1. Disconnect Pokemon Go Plus Bluetooth device in phone.
2. Go to game settings and disconnect Pokemon Go Plus.
3. Turn off game and restart.
4. Restart Catchmon and Pokemon Go App connection.
P.S: Pokemon Go App, Android and iOS system upgrades may cause Catchmon to not
connect. Multiple Catchmons in one place will also cause Bluetooth interference in phone
and cause disconnection.
If unable to connect with Catchmon, please try the following:
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Non-modification Statement :
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Radiation Exposure Statement :
The device has been evaluated to meet general RF exposure requirement,
The device can be used in portable exposure condition without restriction.
Power Rating: DC 3V, AAA batteries*2
369 , Fu-Shin North Road , Taipei Taiwan