manualshive.com logo in svg
background image

WARNING:

       CAUTION: 
THE  PUMP  SHOULD  BE  INSTALLED  ACCORDING  TO  YOUR  LOCAL  ELECTRICAL 
INSTALLATION ORDINANCES AND REGULATIONS.
ONLY QUALIFIED, LICENSED PERSONNEL SHOULD INSTALL PUMP AND WIRING.
1)  Locate  pump  as  close  to  pool  as  possible,  preferably  in  a  dry,  well  ventilated 

area away from direct sunlight. Pump Mount must:

-   

Be  on  solid,  level,  rigid  and  vibration  free  surface.  ecure  pump  to  base  with 

screws or bolts to further reduce vibration and stress on pipe or hose joints

-  

Allow pump suction inlet height t be as close to water level as possible.

-  

Allow use of short, direct suction pipe (To reduce friction loss.)

2) Fixed he pump by screws onto the platform.
3)  Connect  the  suction  and  discharge  pipe  to  the  outlet  and  inlet  of  the 

swimming pool.

4) The installation instructions shall provide information on requirements specified 

for  the  electrical  installation  and  shall  include  reference  to  national  wiring 
rules.

5)  The  installation  instructions  shall  state  the  substance  of  the  following:  -  the 

maximum total head, in metres (Hmax:20m)

6)  the  pump  is  to  be  supplied  through  a  residual  current  device  (RCD)  having  a 

rated residual operating current not exceeding 30 mA.

    This  appliance  is  not  intended  for  use  by  persons  (including  children)  with 

reduced  physical,  sensory  or  mental  capabilities,  or  lack  of  experience  and 
knowledge, unless they have been given supervision or instruction concerning 
use of the appliance by a person responsible for their safety.Children should be 
supervised to ensure that they do not play with the appliance.

Hazardous suction.

Can trap hair or body 

part, causing severe 

injury or death.Do not 

block suction.

3

Correct Disposal of this product

This marking indicates that this product should 
not be disposed with other household wastes 
throughout  the  EU.  To  prevent  possible  harm 
to  the  environment  or  human  health  from 
uncontrolled  waste  disposal,  recycle  it  resp 
onsibly  to  promote  the  sustainable  reuse  of 
material  resources.  To  return  your  used 
device,  please  use  the  return  and  collection 
systems  or  contact  the  retailer  where  the 
product  was  purchased.  They  can  take  this 
product for environmental safe recycling.

Содержание 88029807

















Отзывы: