Mega Lite PAN T BOT, Руководство пользователя

Страница: 8 / 15

8
Settings
Artnet: Please follow your lighting controllers instruction for artnet connection. As each controller has different
procedure for connection. (note: Fixture has a maximum 16 universe setting)
For Mega Control settings please set fixture to this setting:
IP Address
002.168.052.253
SubNet Mask
255.000.000.000
Net 000 Subnet 000
Universe 01
Display: Display On will keep the display on for the entire time the fixtures is powered on. Display Off will auto -
matically turn off the display if there is no changes after 30sec.
Display Rev: Allows you to select from the 17 preprogram patterns that are built into the fixture. It also allows you to
control the speed of those programs from 01 to 99
Pan Rev: Inverts Pan Position
Tilt Rev: Inverts Tilt Position
DMX Fail: This function will allow you to set a default setting if the DMX signal is ever lost or stops working.
Black Out: Will set all channel to 000 and turn light off
Manual: Will go to the set position set on your manual display setting
Auto: Will go to the selected Auto Preset and speed setting set in your auto option
Hold: Will hold last DMX commend until a new command signal is received
Language: Select ether English or Chinese
Systems Settings
DMX Address
Mode
Settings
System Info
001
23Ch
Press Home button. Use the up/down to select the Settings function press En-
ter to engage. Select from the 5 different setting options.
Artnet
Display On
Display Rev Off
Pan Rev N
Tilt Rev N
DMX Fail Bl
Language
Press Home button. Use the up/down to select the System Info function press
Enter to engage. Receive information on 3 different parameters
Firmware V1.1
Time Info 100H
Temp: B38C
Systems Settings
DMX Address
Mode
Settings
System Info
001
23Ch
System Info
Firmware: Gives you information on the software version being used in the fixture.
Time Info: Provides information on the fixture usage, by counting the hours the fixture is powered on
Temp: Gives you fixture internal temperature information.