To unlink a Receiver
1.1
Press and hold the
Function
button on the
Receiver
for about 5 second until the Connection indicator flashes once and then goes off. Now the Receiver is
unlinked
8
Connection
Point to Multi Point Connection
1.1
Connect the
Transmitter
to power, the connection button should be flashing green.
1.2
Connect DMX signal into the
Transmitter
, the connection button should be green.
1.3
Connect the
Receiver
to power, the connection indicator should be off ( if the receiver connection light is not off you need to unlink your receiver)
1.4
Press and quickly release the
Function
button on the
Transmitter.
The transmitter will scan for all unlinked receivers for a period of 10 seconds– the
connection indicator on both Transmitter and Receiver will flash rapidly.
1.5
If the connection is successful the Connection indicator on the Transmitter and Receiver will be green on. If the connection indicator is not on Green, check
that the Receiver is in range and repeat the procedure.
Multi Point to Multi Point Connection
1.1
Connect the
First Transmitter
to power, the connection button should be flashing green.
1.2
Connect DMX signal into the
First Transmitter
, the connection button should be green.
1.3
Connect the
Receiver(s)
to power, the connection indicator should be off ( if the receiver connection light is not off you need to unlink your receiver)
1.4
Press and quickly release the
Function
button on the
First Transmitter.
The transmitter will scan for all unlinked receivers for a period of 10 seconds– the
connection indicator on both Transmitter and Receivers will flash rapidly.
1.5
If the connection is successful the Connection indicator on the Transmitter and Receiver will be green on. If the connection indicator is not on Green, check
that the Receiver is in range and repeat the procedure.
1.6
Connect the
Second Transmitter
to power, the connection button should be flashing green.
1.7
Connect DMX signal into the
Secound Transmitter
, the connection button should be green.
1.8
Connect the
Receiver(s)
to power, the connection indicator should be off ( if the receiver connection light is not off you need to unlink your receiver)
1.9
Press and quickly release the
Function
button on the
Secound Transmitter.
The transmitter will scan for all unlinked receivers for a period of 10 seconds
the connection indicator on both Transmitter and Receivers will flash rapidly.
1.10
If the connection is successful the Connection indicator on the Transmitter and Receiver will be green on. If the connection indicator is not on Green, check
that the Receiver is in range and repeat the procedure.
1.11
You can repeat the process up to 16 Transmitters.
To unlink all Receiver
1.1
Press and hold the
Function
button on the
Transmitter
for about 5 second until the Connection indicator flashes once and then goes off. Now the Receivers
are unlinked
Point to Point Connection
1.1
Connect the
Transmitter
to power, the connection button should be flashing green.
1.2
Connect DMX signal into the
Transmitter
, the connection button should be green.
1.3
Connect the
Receiver
to power, the connection indicator should be off ( if the receiver connection light is not off you need to unlink your receiver)
1.4
Press and quickly release the
Function
button on the
Transmitter.
The transmitter will scan for all unlinked receiver for a period of 10 seconds– the
connection indicator on both Transmitter and Receivers will flash rapidly.
1.5
If the connection is successful the Connection indicator on the Transmitter and Receiver will be green on. If the connection indicator is not on Green, check
that the Receiver is in range and repeat the procedure.
Содержание Mega Air DMX
Страница 2: ......
