Mega Lite MC2010-Q-Loader, Руководство пользователя

Страница: 8 / 10

Run a Chase
Up to 16 scenes can be opened at the same time. Press the corresponding scene button to turn On , and again to turn Off .
Auto Mode
1. Press a desired Chase button
2. Press the Run Mode button until the Auto mode indicator light is on.
3. You can adjust the fade and wait time using the fader.
4. You can also control the speed by pressing the
Insert/Tap button, the time between each tap will be the time between the
next step.
Music Mode
1. Press a desired Chase button
2. Press the Run Mode button until the Music mode indicator light is on.
3. You Can adjust the fade time using the fader. (Wait time cannot be adjusted in Music mode)
4. Press the
Or to select sensitivity of the mic trigger.
Manual Mode
1. Press a desired Chase button
2. Press the Run Mode button until the Manual mode indicator light is on.
3. You Can adjust the fade time using the fader. (Wait time cannot be adjusted in Manual mode)
4. Press the
to go to the next step and to go to the previous step.
Strobe Function
You can select what color or colors to strobe by creating a strobe preset.
1. Hold the Edit/Rec Button for 3 second until the indicator turns on.
2. Press Strobe The indicator light will turn on.
3. Select the desired Fixture 1-16 button.
4. Press the Or to select the fixture channel you want to strobe.
5. Press Edit/Rec for yes if you want that fixture channel to strobe indicator lights will flash.
6. Press Del/Clr for no if you want that fixture channel to strobe indicator lights will flash.
7. Repeat steps 4 to 6 to select all the desired channels to strobe.
8. Hold the
Edit/Rec Button for 3 second to exit.
Create Strobe Function
Run Strobe Function
1. Press and hold the Strobe button.
2. Adjust the Strobe Sped fader to the desired strobe speed.(1-20Hz)
3. Release
Strobe button to exit.
Note: The Strobe button will now memories the speed you selected.
Strobe Speed from 1 to 20
Strobe Channel Not Active
Strobe Channel Active
8
USB Function
The Q-Loader can load pre programmed shows data and load it from the Mega-Lite Web site at
www.mega-lite.com/prolight/
dmxcont/qloader
. You can also store up to 16 files (shows) on the fixture or store files (shows) on a USB flash drive.
Save Show to USB
1. Insert USB flash drive
2. Press and hold the
Run Mode and the button at the same time until display reads Save .
3. Press the Fixture button 1-16 as the destination to save the file.
Note: If green indicator light is on there is an existing file in the USB.
=Q-loader 1
=OK
When the Display reads OK the file is backed up to USB flash drive
Caution!
1. Do not remove USB flash
drive while operational