MEFE—Mitchell Engineering Food Equipment Pty Ltd
23 Storie Street Clontarf QLD 4019 Australia
www.mefe.com.au | [email protected]
Page 4
+617 3283 4536
Free AU 1800 669 006
Installation Cont.
Calibrating the Sensing Range
The sensor tap will automatically calibrate the sensing range within 22cm when first connected to power. Please ensure the
tap has been installed in the correct and final position before connecting to power. When connected to power the sensing light
will flash indicating it is in programming mode, please do not interfere or obstruct for at least 60 seconds. During this time the
sensor light may stop flashing, please do not interfere for the required 60 seconds. To set the sensing range yourself, obstruct
using an object (hands, etc) at the desired maximum range before connecting to power. We recommend allowing the tap to
automatically set sensing range for best results.
When a user
’
s hand is placed in the sensing range, the solenoid valve is activated and opens to allow water flow. When hands
are removed, the solenoid valve will close stopping water flow. The infrared sensor will continue to emit invisible infrared light,
ready for the next user.
If the device is on for more than 60 seconds, or the faucet remains in sensing state for a long time, the solenoid valve will auto-
matically close until the user leaves the sensing range.
