4
341 300 6A Turn Knob
5. Operation
1.
The machine should be installed on a work surface that has sufficient stability and support.
2.
Make sure that the line voltage of your main power source matches the rated voltage of the machine.
3.
Turn the switch on and let the machine run for about 2
-
3 minutes, then look if the machine works well.
4.
Turn the switch on, the lamp in the power button should be lit and the blade rotating anticlockwise.
5.
Adjust the slicer thickness by turning the slicer thickness regulator anticlockwise. Turn the fixing positioner knob
clockwise.
6.
Push the product carriage back and forward over the blade with a continuous motion, using the product pusher
handle and the push knob.
7.
After slicing the desired amount, turn the fixing positioner knob and let the fixing positioner head back to its
original position.
8.
You can now move away the slicers and the products.
1. Sharpener. 341 300 1
1.1. Red sharpener. 341 300 1A
1.2. Grey sharpener. 341 300 1B
4. Carriage
7. Power button
2. Guard cutter
5. Product pusher handle
8. Scale plate
3. Active pusher
6. Slicer thickness regulator
9. Slicer
1.2
1.1