Page 12
Meet PAT™
| Products and Things Pty Ltd |
meetpat.com.au
| Level 1, 419 Townsend Street, Albury, NSW, 2640, Australia
Phone: (02) 60217813, +61260217813 Email: [email protected]
Meet PAT™
| Meet PAT Limited NZ |
meetpat.co.nz
| 12 Bethlehem Road, Bethlehem, Tauranga, 3100
Flow Meter - instructions
Re-Setting
*The display will automatically turn off
after a few seconds
Press the “DISPLAY” button and the
“RESET” button together for 4 seconds.
The unit will beep once reset.
0
lt
Reading the Display
*The display will automatically turn off
after a few seconds
Press the “DISPLAY” button once to
display real-time flow rate.
Press the “DISPLAY” button again to
display the total liter count up.
3000
lt
Attention
1. Do not spray water into or around the
flow meter.
2. Be-careful to not damage the wires
when removing the flow meter.
3. For replacement parts and
troubleshooting please contact MeetPAT.
Beeping
When the battery is low, the buzzer will
beep twice and the battery symbol blink
to notify the user to change the battery.
1. LCD Display
2. Display Button
3. Reset Button
2
3
1
Each MeetPAT unit is fitted with a digital flow meter. This is set to count up the amount of
liters that have flowed through the unit.
This is important so you know when to change the carbon cartridge (if in the unit), when a
service is due and to provide valuable marketing data.
*The flow meter will automatically
turn on when there is water flowing
through the sensor.
It will automatically turn off in 10
seconds when there is no water
flowing.
