8
LED INDICATOR LIGHTS
The Air-Fi Rumble has a status indicator light on the left earcup and a
charging indicator light on the right earcup. They display the status of the
headphones as follows:
Headphone Status
Indicator Light
Low battery
Solid red status indicator light
Charging
Solid red charging indicator light
Fully charged
Charging indicator light off (with charging
cable plugged in)
Pairing mode
Status indicator light flashes red and blue in
an alternating manner
On and not connected to Bluetooth
device
Status indicator light flashes blue every
second
On and connected to Bluetooth device Solid blue status indicator light
Incoming call
Status indicator light flashes red twice every
second
Call in progress
Status indicator light flashes blue twice
every second
USING AS A WIRED HEADPHONE
The Air-Fi Rumble can be used as a wired headphone by plugging one end
of the included stereo audio cable into the jack on the left earcup and the
other end into any audio device with a standard 3.5mm headphone jack. This
allows use when the battery is depleted and with devices that do not have
Bluetooth (such in-flight entertainment systems) or aren’t paired.
The Air-Fi Rumble can be used wired while also connected via Bluetooth to
another device; Bluetooth audio takes precedence over wired audio. Wired
audio will be partially muted whenever a signal is transmitted via Bluetooth
and will resume approximately 4 seconds after the Bluetooth transmission
ends.
Note: the built-in microphone of the Air-Fi Rumble will not work in wired mode.
