USING AS A WIRED HEADPHONE
The Air-Fi Touch can be used as a wired headphone by plugging one end of
the included stereo audio cable into the left earcup and the other end into any
audio device with a standard 3.5mm headphone jack. This allows use when
the battery is depleted and with devices that do not have Bluetooth (such
in-flight entertainment systems) or aren’t paired.
The Air-Fi Touch can be used wired while also connected via Bluetooth to
another device; Bluetooth audio takes precedence over wired audio. Wired
audio will be partially muted whenever a signal is transmitted via Bluetooth
and will resume approximately 4 seconds after the Bluetooth transmission
ends.
Note: the built-in microphone of the Air-Fi Touch will not work when the
headphones are used only in wired mode.
SAFETY AND CARE
When not in use, power the headphones off and store in the included
protective carrying case.
Clean with a soft cloth, damp with diluted soap water solution if
necessary. Do not use chemical cleaners.
There are no user replaceable/reparable parts in the headphones.
Disassembling it will void your warranty.
Do not expose the headphones to liquids. If the device comes in contact
with liquids, quickly wipe away. If submersed in water, do not turn the de-
vice on until completely dried. Note: liquid submersion voids the warranty.
Do not use around flammable gasses as fire or explosion may occur
Battery performance will be severely decreased when stored in extreme
temperatures: below -10°C/14°F or above 45°C/113°F including direct
sunlight.
Replacement parts and accessories are available online at
www.meelec.com
a)
b)
c)
d)
e)
f)
g)
SPECIFICATIONS
See the Air-Fi Touch product page at www.meelec.com for product
specifications.
TROUBLESHOOTING
Visit www.meelec.com/bluetooth for additional Bluetooth information and
troubleshooting.
WARRANTY:
The Air-Fi Touch is covered by a 1-year manufacturer warranty. For more
information, visit www.meelec.com/warranty.
9
Содержание AF65 AIR-FI Touch
Страница 11: ...www meelec com...
