EN
115
4
Make a felling cut from the opposite side of the notch, slightly higher up than the bottom
of the notch
LOGGING
WARNING
• Make sure that you have a good foothold and that the tree is lying in a stable position
• Be alert to the fact that cut logs can overturn or roll away
• Read the instructions in the “Safe Operation” section to avoid kickback
• Before starting work, check the direction of bending force inside the log to be cut
• Always finish cutting in the opposite direction to the bending force, to prevent the guide bar
from being caught in the cutaway
Cutting an unpillowed log
• Saw down halfway, then roll the log over and cut the rest from the opposite side (fig 4)
2
3
1
50 mm
50 mm
5
Felling direction
6
Notch cut
7
Felling cut
Содержание TCS5000
