
ENGLISH
53
1. Float
housing
2. Drain
plug
3. Washer
4. Fuel
filter
Engine oil
1.
Change the engine oil.
2.
Remove the spark plug.
3.
Pour a tablespoon (5–10 ml) of clean engine oil into the cylinder through the spark plug hole.
4.
Pull the starter cord a few times to distribute the oil.
5.
Replace the spark plug.
1. Oil
2.
Spark plug hole
Start-up after storage
1.
Check the engine according to the instructions in the section on Checks before use.
2.
Fill the tank with new petrol if the tank and carburettor are empty. Petrol cans must always contain
new petrol. Petrol deteriorates over time, which can cause starting problems.
If the cylinder has been conserved with oil, the engine will smoke briefly at start-up. This is
completely normal.