Meec tools 721-382, Руководство по эксплуатации

Страница: 31 / 33

EN
31
Fitting the brush
NOTE!
Always disconnect the paving stone cleaner’s plug before fitting or dismantling the brush.
Use the accompanying tools when fitting the brush in order to avoid damaging the paving stone cleaner.
Use protective gloves when fitting the brush.
1. Insert the accompanying metal pin into the
hole on the axle to lock the axle (A).
2. Loosen the nut which holds the brush (B).
Ensure the axle is locked the entire time.
3. Remove the brush from the axle.
4. Fit the new brush onto the axle.
5. Ensure the brush’s rotation direction is
aligned with the direction of the arrow
on the guard. There is an arrow on the
brush which indicates the brush’s rotation
direction.
6. Tighten the nut while simultaneously
keeping the axle fixed.
7. Follow the instructions in reverse order to
detach the brush.
OPERATION
Intended use
The paving stone cleaner is intended to be used for removing weeds from outdoor areas and between
paving stones. The paving stone cleaner is intended for household use, not professional use.
Starting and stopping
1. First press the starting lock followed by the power switch to start the paving stone cleaner.
2. Release the power switch to switch off the paving stone cleaner.
Use
1. Connect the paving stone cleaner to a suitable extension cable.
2. Wind the extension cable around the strain-relief.
3. Hold the paving stone cleaner with both hands.
4. Press the starting lock and power switch.
5. Run the paving stone cleaner at a steady speed over the surface.
6. For best results the paving stone cleaner should not be used on wet surfaces.
7. Brush longer joints first and shorter ones afterwards.