33
Use
1.
Lubricate the tool before use as instructed in the section
on care and maintenance.
2.
Fit the handle in the threaded hole on the tool.
3.
Lubricate the gears by unscrewing the screw with a
screwdriver (not included) and apply grease in the screw
hole with a grease gun (not included). The gears must be
lubricated every working day.
4.
The blade guard can be turned to the position required.
Loosen the screws using a spanner and move the guard.
Refit and tighten all four screws before using the tool.
5.
Remove the flange nut and place a 5" grinding disc (not
included) on the spindle. Tighten the flange nut on the
spindle using an adjustable spanner, while holding the
spindle with the other spanner.
NOTE!
Only use discs with at least the same permitted speed
as that of the tool.
