Meec tools 029-052, Руководство по эксплуатации

Страница: 59 / 65

ENGLISH
59
WARNING! Remove the battery before making any adjustments, changing accessories or putting the power
tool away.
IMPORTANT! Wear safety gloves when handling accessories
– risk of cut injuries. The accessories get hot
during use
– risk of burn injuries.
WARNING! Make sure to fit accessories correctly. Incorrectly fitted or loose accessories can release during
use and cause injury.
1.
Remove the battery from the tool.
2. Release the flange screw with the supplied hex key.
3. Check that the drive shaft and the internal thread are clean.
4. Align the slots on the accessory to the bars on the drive shaft and put the accessory on the shaft.
Wear protective gloves. Hold the accessory firmly with one hand, screw in the flange screw and tighten with
the hex key.
NOTE! Accessories can be fitted at an angle of 30° to 330° to the shaft.
Accessories can be used together with the supplied adapter.
1.
Remove the battery from the tool.
2. Release the flange screw with the supplied hex key.
3. Check that the drive shaft and the internal thread are clean.
4. Align the slots on the toothed adapter to the bars on the drive shaft and put the adapter on the shaft.
Fit accessories on the adapter.
5. Wear protective gloves. Hold the accessory firmly with one hand, screw on the flange screw and
tighten with the hex key.