Meec tools 021-019, Руководство по эксплуатации

Страница: 19 / 24

SAFETY INSTRUCTIONS
ENGLISH
19
read the Operating Instructions carefully before use
• Keep the work area clean and well lit. Dark and cluttered work areas increase the risk of accidents and
injuries.
• Keep the workplace environment safe.
• Do not expose the tool to rain or damp conditions.
• Do not use the tool near flammable liquids or gases.
• Avoid electric shocks. Avoid body contact with earthed surfaces such as pipes, radiators, cookers and
refrigerators.
• Store out of the reach of children.
• Keep unauthorised persons, especially children, away from the workplace. Do not allow them to touch the
tool.
• Persons who are not familiar with these instructions must not use the tool.
• Store the tool in a dry place and out of the reach of children when it is not in use.
• Only use recommended accessories.
• Only use accessories recommended by the manufacturer. Accessories that are not intended for the tool
can cause personal injury.
• Wear suitable clothing. Do not wear loose-fitting clothing or jewellery watches or the like, as these can get
caught in moving parts.
• Rubber gloves and non-slip shoes are recommended when working outdoors.
• Wear a hair net if you have long hair.
• Always work in a safe position.
• Always maintain a firm footing and good balance.
• Stay alert. Always be careful when using the equipment.
• Do not use the tool when you are tired.
• Secure the workpiece properly.
• This is safer than using your hands, and means you have both hands free to operate the tool.
• Keep the tool clean and in good condition. Keep the tool clean for better and safer work.
• Read these instructions before carrying out maintenance and replacing accessories.
• Keep the tool clean, dry and free from oil and grease. Always check before using the tool that all safety
equipment is in place and working properly.
• Regularly check the condition of leads, electrical connections, clips, fuses and wires etc.
• Keep the power cord away from heat, oil and sharp edges.
• Use personal safety equipment. Depending on the type of tool and how it is used, safety equipment such
as dust masks, non-slip safety shoes, safety helmets and ear protection reduce the risk of personal injury.
• Wear ear protection if the sound level exceeds 85 dB (A).
• Make sure the tool is not damaged before using it.
• Before using the tool, always make sure it is not damaged and that it operates correctly and in the intended
manner.
• Check that all screw connections are tight, that moving parts are correctly adjusted and can move freely,
that no parts are incorrectly fitted or defective, that no wires are damaged, and that there are no other
factors that could affect functionality.
• Repairs must only be carried out by qualified personnel.
• The tool complies with the relevant safety regulations.
• Repairs must only be carried out by qualified personnel using original spare parts.