ENGLISH
22
Using other pneumatic tools
Other pneumatic tools may require considerably more pressure than nail guns because they have
longer operating cycles and operating times.
Air hoses can result in a pressure drop of up to 1 bar, for which reason you need to set a higher
output pressure on the compressor to maintain the correct pressure for the tool. Do not exceed the
maximum permitted air pressure.
The air flow required to operate several tools at the same time depends on the number of tools and
the frequency of use.
See instructions for the tools for requirements concerning air flow and air pressure.
MAINTENANCE
1.
The product must only be used for its intended purpose and in accordance with these instructions.
2.
Place the product on a level, stable surface.
3.
Relieve the pressure and disconnect all air hoses when the product is not in use.
4.
Check the product regularly. If the product is damaged it must be replaced by qualified personnel.
Only use identical spare parts when servicing. The warranty will cease to be valid if other spare
parts are used. Only use accessories recommended by the manufacturer. Servicing and
maintenance must be carried out regularly by qualified personnel to ensure safe use.
5.
If the product is not going to be used for some time, relieve the pressure, disconnect all air hoses
and wipe the product with a dry cloth. Store the product in a dry place out of the reach of children.
TROUBLESHOOTING
Problem
Cause
Action
The manometer shows no
pressure, or incorrect
value.
1.
The manometer is damaged.
2.
The control knob does not
work.
3.
Air leak in the product.
1.
Replace manometer.
2.
Replace the control knob.
3.
Replace the seal between the
4.
upper branch pipe and the
casing.
The product does not
provide enough pressure
for the connected tool.
1.
Fault on the power switch
contacts.
2.
Blocked components.
3.
The motor speed drops as a
result of overloading.
1.
Have the power switch
replaced.
2.
Check and repair power tool.
3.
Reduce the load.
Jula reserves the right to make changes. In the event of problems, please contact our service
department.
www.jula.com
