Meec tools 014144, Руководство по эксплуатации

Страница: 49 / 53

EN
49
OBD II DIAGNOSIS
Mark item OBD II Diagnosis and press ENTER button. The display shows:
1. OBD II diagnosis
2. Read fault codes
3. Delete fault codes
4. Read chassis number
5. System protocol
FIG. 11
Reading of fault codes
This function reads fault codes in the vehicle computer. There are two
types of fault codes:
• Permanent fault codes that switch on the fault status light
(Malfunction Indicator Lamp, MIL) and pending fault codes.
Permanent fault codes:
• Fault codes refer to emissions or performance related faults that
cause the computer to switch on fault status light.
In some vehicles the fault message “Service Engine Soon” is shown,
or “Check Engine”. Permanent fault codes are stored in the vehicle
computer memory until the fault is corrected. Mark the item Read Fault
Codes and press ENTER button. The product reads the fault codes stored
in the vehicle computer. The number of fault codes incurred is shown
according to the principle:
1. Fault codes
2. Total number of codes: 07
3. Number of fault codes: 00
4. Number of pending fault codes: 0
FIG. 12