Meec tools 012598, Руководство по эксплуатации

Страница: 25 / 26

EN
25
DESCRIPTION
1. Wheel for adjusting the cutting depth
2. Collection bag
3. Power switch lock
4. Power switch
5. Battery
6. Safety switch
FIG. 1
ASSEMBLY
UNPACKING
Unpack all parts and place them on a level and
stable surface. Remove all packaging material
and any transport locking devices. Check that
all parts are included and undamaged.
Take care so no small parts are lost.
COLLECTION BAG
Fit the dust collection bag for dust and chips.
FIG. 2
USE
WARNING!
• Only use batteries and chargers
intended for Meec Multi Series. All other
use of batteries or chargers can involve a
fire hazard and personal injury.
• Do not use the electric planer if parts are
missing or damaged – risk of serious
personal injury.
• Use appropriate protective equipment to
avoid personal injury.
NOTE:
Make sure the material to be processed
does not contain metal objects or other hard
material that can damage the electric planer.
Approved in accordance with
the relevant EU directives.
Recycle as electrical waste.
TECHNICAL DATA
Rated voltage 18 V DC
Max. speed, no load 10000 /min
Planing width 60 mm
Planing depth 0 – 1.5 mm
Sound pressure level, L
pA
77 dB(A), K=3 dB
Sound power level, L
wA
88 dB(A), K=3 dB
Vibration level does not exceed 2 m/s²
Always wear ear protection.
The declared values for vibration and noise, which
have been measured according to a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN 62841-2-14:2015.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling,
in addition to the start-up time).