EN
16
B. Brightness
C. Turning/mirror inversion of image
D. Power switch
FIG. 7
VIDEO OUTPUT
Connect the video cable to the video output on
the display (11) and connect the other end of
the cable to the video input on a compatible
monitor. The image on the display is
transferred with high resolution to the monitor.
SWITCH ON THE CAMERA
1. Press the power switch (D)) for about 3
seconds to switch on the camera. The
status light (8) goes on and the display is
activated.
2. Carefully move the flexible hose to the
required position and shape it. It can be
shaped as necessary to inspect places
difficult to reach.
3. The accessory can be used to localise and
pick up small objects.
MIRROR INVERSION OF IMAGE
The image can be mirror inverted with the
function key "C” in real time.
1. Normal
2. Mirror inverted
3. Normal up and down
4. Mirror inverted up and down
FIG. 8
ADJUSTING THE BRIGHTNESS
There are eight settings for brightness, which
can be set with the function key "B" during real
time displaying.
FIG. 9
8. Power status
9. Handheld unit with LCD
10. Battery cover
11. Video output
FIG. 1
USE
INSERTING THE BATTERIES
1. Remove the battery cover.
2. Take out the battery holder from the
handle part. Insert four new AA batteries
with the polarity shown in the battery
compartment.
3. Replace the battery cover.
FIG. 2
CONNECTION OF FLEXIBLE HOSE
Fit the connector on the hose to the connection
on the handle part and press it in the
connection. Do not press too hard. Turn the
screw socket clockwise to lock the connection.
1. Press the connector in the connection.
FIG. 3
2. Tighten the screw socket.
FIG. 4
FITTING ACCESSORIES
All the supplied accessories – mirror, hook and
magnet – fit on the product as follows.
1. Hook on in the hole.
FIG. 5
2. Put on the rubber ring.
FIG. 6
FUNCTION KEYS
A. Contrast
Содержание 010982
Страница 3: ...1 1 2 9 8 3 6 7 5 4 10 11 ...
Страница 4: ...7 2 4 3 5 6 A B C D ...
Страница 5: ...9 10 8 1 2 3 4 7 ...
