EN
15
PREPARATIONS
Inserting/replacing batteries
1. Switch off the product with the power
switch (3).
2. Open the battery cover (8) by pressing the
lock tab (a) to the magnet.
3. Insert the batteries (b) with the correct
polarity.
4. Close the battery cover (8) and check that
the lock tab snaps in place.
FIG. 2
Wall bracket
The supplied wall bracket (6) can be mounted
on a wall with a screw or nail, or mounted on
a stand with 1/4 inch thread underneath.
Follow the instructions below to fasten the
laser unit on the wall bracket.
• Fasten the laser unit to the metal plate (6)
on the wall bracket with the magnets
underneath or on the back.
• Set the required projection height with
the angle adjuster knob (7).
Remove in the reverse order.
HOW TO USE
Starting and switching off
Push the power switch (3) to the laser outlet to
be used (1 or 5). With the laser unit arranged
as in diagram 1 the power switch should be
pushed to the left to use the line laser, and to
the right to use the point laser. Push the power
switch back to the middle to switch off.
Spirit level
Set the laser unit in the horizontal and vertical
plane with the spirit levels (2 and 4).
DESCRIPTION
Compact laser pen that generates a laser
point (20 m range) and laser line (5 m range).
With horizontal and vertical spirit bubbles and
magnets. Wall bracket included. Runs on two
AAA batteries (sold separately).
1. Laser beam outlet, line
2. Horizontal spirit level
3. Power switch
4. Vertical spirit level
5. Laser beam outlet, point
6. Wall bracket
7. Angle adjuster knob (wall bracket)
8. Battery cover
FIG. 1-2
USE
UNPACKING AND INSPECTION
Carefully unpack the product and check that
all the parts are included. Do not attempt to
assemble or use the product if any parts are
missing or damaged. Contact the retailer.
• Open the package and carefully unpack
the product.
• Remove all packaging materials and any
transport protection.
• Check that all the parts are included.
• Inspect the product and accessories for
damage.
• Save the packaging materials for future
use.
WARNING!
Do not allow children to play with the
packaging material or the product. Do not
allow children to play with plastic bags, foil
or small parts. Risk of suffocation!
