EN
30
• If necessary, press the F button to select
the reference point for the measurement.
• Press the A button once to switch on the
laser beam.
• Place the product with the selected
reference point at the starting point for
the measurement and point the laser
beam at the target point.
• Press the A button once to measure.
→ The result is shown at the bottom, in the
selected unit of measure (standard setting in
metres).
FIG. 5
CONTINUOUS DISTANCE
MEASURING (DETECTION OF
MINIMUM/MAXIMUM DISTANCE)
Symbol
FIG. 6
• Tap the A button to start the product.
• If necessary, press the F button to select
the reference point for the measurement.
• Press the A button once to switch on the
laser beam.
• Place the product with the selected
reference point at the starting point for
the measurement and point the laser
beam at the target point.
• Press the A button for 2 seconds to start
continuous measuring.
→ Min: the minimum distance is shown.
FIG. 6a
→ Max: the maximum distance is shown.
FIG. 6b
The value is shown at the bottom, in real time.
AREA MEASURING
Symbol
FIG. 7
Starting and switching off
Tap the ON button/measuring button (A) to
start the product. Press the OFF button (C) for
about 1 second to switch off the product.
SELECTION OF UNIT OF MEASURE
Metric display is the default setting. It is
possible to choose between three other units
of measure. To select another unit of measure,
press the (4, F) button until the unit changes.
Press several times to show the required unit.
FIG. 3
SETTING THE REFERENCE POINT
The measurements can be based on three
different reference points on the product.
Select the reference point by tapping the
F button.
FIG. 3
• Reference point on the front of the
product.
FIG. 4a
• Reference point on the back of the
product.
FIG. 4a
• Reference point on folding support.
FIG. 4b
MEASURING
NOTE:
The laser beam switches off automatically
after each completed measurement.
Press the ON button/measuring button.
SINGLE MEASUREMENT/DISTANCE
No symbol
• Tap the A button to start the product.
