EN
32
TROUBLESHOOTING
Problem
Possible cause
Action
The product will not start.
The plug is not plugged in.
Plug in the plug.
The power cord or plug is
damaged.
Contact an authorised
electrician.
Other electrical fault.
Contact an authorised
electrician.
The overheating protection has
tripped.
Allow the product to cool
before starting it again.
The cover is not properly in
place.
Fit the cover correctly.
The material is not shredded
properly.
The fixed blade is not properly
adjusted.
Adjust the fixed blade.
The product vibrates
abnormally and/or makes a lot
of noise.
The blade system is damaged.
Allow an authorised service
centre to repair the blade
system.
The blade system is blocked.
Remove the blockage.
Loose screw connections.
Tighten the screw joints.
Содержание 010260
Страница 4: ...1 1 2 3 4 5 6 7 8 9 10...
