Meec tools 010-064, Руководство по эксплуатации

Страница: 9 / 10

ENGLISH
9
USE
The delta sander is intended for fine sanding.
Fitting the sandpaper
Place sandpaper with the required degree of fineness on the sanding pad. Align the holes in the
sandpaper with the dust extraction holes in the sanding pad.
Press the sandpaper firmly onto the pad.
The sandpaper must be firmly attached so that it does not come loose.
Dust extraction
Connect a dust extraction hose to the dust extraction port.
Switching On and Off
Start the tool by setting the power switch in the I position.
Switch off the tool by setting the power switch in the O position.
MAINTENANCE

The tool does not require any special maintenance.

Clean the ventilation openings regularly.
Jula reserves the right to make changes. In the event of problems, please contact our service
department.
www.jula.com