Meec tools 009-021, Руководство по эксплуатации

Страница: 12 / 14

ENGLISH
12
TECHNICAL DATA
Rated voltage 230 VAC, 50 Hz
Speed (no load) 6000 rpm
Torque 500 Nm
Socket 1/2" (12.7 Nm)
Sound pressure level, LpA 87dB(A), K= 3 dB
Sound power level, LwA 98dB(A), K= 3 dB
Vibration level 9,8m/s2, K= 1,5 m/s2
Net weight 1.8 kg
Always use hearing protection!
The vibration level specified in these instructions has been measured in accordance with standardised tests
and can be used when comparing different tools. The value may also be used for a preliminary assessment
of exposure.
WARNING: Vibration levels can deviate from the declared value during the actual use of the tool, depending
on how the tool is used. The appropriate precautions implemented by users must be based on the actual
conditions, taking into account all parts of the operating cycle, such as the time when the tool is switched
off and the idling time, in addition to the time when the power switch is pressed.
OPERATION
Power switch/direction selector left/right
Power switch/direction selector
Start the tool by pressing in the top part of the power switch. Stop the tool by releasing the power switch.
Press the bottom part of the power switch for clockwise rotation (tightening). Press the top part of the power
switch for anticlockwise rotation (loosening).
Fitting/removing sleeves/accessories
Press the sleeve/accessory firmly on the socket.
Remove by pulling the sleeve/accessory straight out from the socket.