EN
41
DESCRIPTION
1. Switch drilling/screwing
2. Rotation selector
3. Power switch
4. LED light
5. Torque selector
6. Chuck
7. Battery charger
8. Battery
USE
Battery and charger
NOTE:
Only use the supplied charger to charge the battery. Fully charge the battery before using it for
the first time.
Charging the battery
1.
Align the guide slots on the battery to the slots on the charger and firmly push in the battery
until it clicks in place. The battery is shaped so that it can only fit one way in the charger.
This connects the positive (+) and negative (-) terminals correctly.
2.
Connect the battery charger to the power point. The red LED on the charger goes on.
3.
When the battery is put in the charger the green LED goes on and starts flashing.
This indicates that the battery is charging. At the same time the red LED on the
charger starts flashing briefly before remaining constantly red.
4.
The battery is fully charged when the green LED stops flashing and remains constantly green.
1
2
3
8
4
6
7
