ENGLISH
PACKAGE CONTENTS
WEARING THE EARPHONES
STEP 1: SELECT AND INSTALL THE CORRECT EARTIPS
The X6 Plus is an in-ear headphone and relies
on a tight seal between the eartips and your
ear canals to deliver good bass response and
overall sound quality. Four sizes of eartips are
included to help you achieve the best fit. We
recommend trying all of included eartips and
selecting the ones that provide the best sound
and comfort for your ears.
Choose eartips that:
• Allow the earphone to fit flush in your ear
• Seal with your ear canal and reduce outside
noise when inserted
• Provide the best bass response
Install eartips as shown. Make sure eartips are
installed securely before use.
CHARGING
Connect the charging cable to any powered
USB port and to the charging port located on
the headset’s remote control. Charge time is
approximately 2 hours. The status indicator
light will stay red while charging and turn blue
when fully charged.
Note:
For maximum sweat resistance,
make sure that the USB port cover is closed
completely after charging the headset.
When the battery is low, the headset will say
“battery low” and a red light on the remote will
flash periodically.
Apple
®
devices such as the iPhone
®
, iPad
®
,
and iPod touch
®
will also display an on-screen
headset battery indicator while the X6 Plus is
connected.
battery indicator
WEARING THE EARPHONES (CONT.)
STEP 2: INSERT INTO EARS
The X6 Plus earphones feature an over-the-ear
design with Flex-wire earhooks.
To put on the X6 Plus, first identify the right and
left earpieces as indicated by the “R” and “L”
markings. They are not interchangeable.
Place the cable behind your neck, route
the earhooks around your ears, and put the
earpieces in your ears. Adjust each earpiece
until it fits flush in the ear and the eartip seals
in the ear canal.
WEARING THE EARPHONES (CONT.)
CORRECT FIT
The earphone sits
flush in the ear and the
cable is secure behind
the ear.
When worn correctly,
the earphones will
reduce outside
noise and
deliver good bass impact.
If you do not get much bass or hear tinny
sound with excessive treble presence, re-
adjust the fit of the earphones in your ears
and/or try a different size of eartips.
Note: If you must remove and reinsert the
earphones while working out, avoid getting
sweat in the nozzle as this may lead to a
temporary reduction/loss of sound.
(OPTIONAL) IMPROVING PHONE CALL PERFORMANCE
For best microphone
performance during
phone calls, the X6 Plus
can be worn with the
wire in the front to improve
microphone positioning.
Orient the microphone
towards your mouth to
ensure the clearest and
loudest voice pickup.
BLUETOOTH PAIRING
Your headset must be paired to a Bluetooth
device before it can be used. It is only
necessary to pair your headset once with each
device.
Make sure the X6 Plus is turned off and within
3 feet (1 meter) of your device. Put the headset
in pairing mode by holding the Multifunction
button for about 4 seconds until the status
indicator light begins to flash red and blue in
an alternating pattern and the headphone says
“Pairing”.
Phones and tablets
Open the Settings menu and select
Bluetooth. If Bluetooth is not on, turn it on.
Select “Search for Devices” or “Refresh” if
your phone or tablet does not automatically
search for new devices.
Other devices
Visit
www.MEEaudio.com/Bluetooth
for
pairing & setup information.
Wait until you see “MEE audio X6 Plus” on the
screen of your device. Select it and follow any
further prompts to pair. Use “0000” if a pin is
required. Once connected, the headset will say
“Connected” and the blue indicator light will
flash two times every 3 seconds.
If pairing fails, please refer to your
device’s user manual for further information.
Visit the Bluetooth Support Page at
MEEaudio.com/Bluetooth
for instructional
p a i r i n g v i d e o s a n d t r o u b l e s h o o t i n g
information.
CONNECTING TO PAIRED DEVICES
W h e n p o w e r e d o n , t h e X 6 P l u s w i l l
automatically connect with the most recently
paired and/or connected Bluetooth device
that is powered on and within range. If the
headset does not connect automatically, open
the Bluetooth menu on your device and select
“MEE audio X6 Plus” from the Bluetooth device
list.
CONNECTING TO MORE THAN ONE
DEVICE (MULTIPOINT)
Multipoint is a feature that allows two
Bluetooth devices to be connected to the X6
Plus simultaneously. Both devices will need
to be paired before multipoint can be used by
following the pairing procedure described in
the
BLUETOOTH PAIRING
section for each
device. Once paired with both devices, power
on the X6 Plus on and wait until it connects to
the last paired device. Then, select “MEE audio
X6 Plus” from the Bluetooth menu of second
device you wish to connect. The headset
cannot be connected with more than two
devices at a time.
Note:
Headset operating range and battery
life may be reduced when maintaining two
connections via Multipoint
X6 Plus Stereo
Bluetooth Wireless
Sports In-Ear
Headphones
User
manual
Micro-USB
charging
cable
4 pairs of
eartips
WARNING
Using headphones at high volumes for extended
periods of time will result in permanent hearing
damage. It is advised you keep volume levels
moderate to low at all times for your safety. Turn
the volume all the way down after connecting your
earphones, then gradually increase the volume until
you reach a comfortable listening level. Do not use
while driving a car, cycling, operating machinery,
or performing other activities that require hearing
surrounding sounds.
TROUBLESHOOTING
Visit the Bluetooth Support Page at
MEEaudio.com/Bluetooth
for troubleshooting
procedures. For any additional questions, visit
MEEaudio.com/Support
or email
WARRANTY
T h i s p r o d u c t i s c o v e r e d b y a 1 - y e a r
manufacturer warranty when purchased from
an authorized retailer. For more information,
contact your local MEE audio dealer or visit
MEEaudio.com/Support
SAFETY & CARE
• To clean, remove the eartips and rinse them
under running water. Clean the earphones
using a cotton swab damp with a small amount
of rubbing alcohol. Allow the earphones and
eartips to dry completely before resuming use
• Use only the supplied Micro-USB charging
cables or compatible replacements from a
reputable manufacturer
• Battery performance will be severely decreased
when stored in extreme temperatures: below
-10°C/14°F or above 50°C/122°F, including direct
sunlight
• The lifetime of the battery will be significantly
reduced if your headset is not charged for a long
time. It is recommended to charge your headset
at least once a month.
• There are no user replaceable/reparable parts
in the headset. Disassembling it will void your
warranty.
• If the device comes in contact with liquids,
quickly wipe away. If submersed in water, do not
turn the device on until completely dried. Note:
liquid submersion voids the warranty.
• Do not use around flammable gasses as fire
may occur
• Keep the device and packaging out of reach of
children
FUNCTIONALITY & CONTROLS
* You may need to bring your preferred media player
application up on the screen for media playback to start.
** Not all devices support this functionality. For more
information, refer to the user manual for your device.
VOLUME UP / SKIP TRACK BUTTON
[TAP]
[HOLD 1 sec]
- Increase volume
- Next track
POWER / MULTIFUNCTION BUTTON
[HOLD 3 sec]
[TAP]
[TAP]
[HOLD 2 sec]
[TAP]
[HOLD 2 sec]
[DOUBLE TAP]
- Power on / off
- Play / pause
(during media playback*)
- Answer Incoming Call
- Reject Incoming Call
- End call (during phone call)
- Activate Siri / voice
command / voice dialing**
- Redial**
VOLUME DOWN/PREVIOUS TRACK BUTTON
[TAP]
[HOLD 1 sec]
[HOLD 2 sec]
- Decrease volume
- Previous track
- Mute/unmute microphone
(during phone call)
Plus
MULTIPOINT FUNCTIONALITY
To switch between the two devices, pause
audio playback on the active device and
start audio playback on the other connected
device. It takes several seconds for the audio
to switch.
Incoming calls will always take precedence
over media. When a call comes in, the X6 Plus
will automatically activate the device with
the incoming call. Some devices, such as
computers and standalone audio transmitters,
may not allow audio switching except when a
phone call occurs.
If you no longer wish to connect to multiple
devices, disable Bluetooth on the device
you do not want connected to the X6 Plus or
disconnect the “MEE audio X6 Plus” using the
Bluetooth menu of that device.
FACTORY RESET
A factory reset will clear all paired devices
from memory. To perform a factory reset, put
the headset in pairing mode as described in
the
BLUETOOTH PAIRING
section, then press
and hold the Volume up and Volume down
buttons at the same time for 2 seconds. The
headset will produce three tones and the blue
indicator light will flash to indicate the memory
has been cleared. The headset will need to be
paired with a Bluetooth device before use.
Have a question?
Email
The Bluetooth
®
word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by MEE audio is under license.
Other trademarks and trade names are those of their respective owners.
MEE audio and its logo are registered trademarks of S2E, Inc.
All rights reserved.
iPhone
®
, iPad
®
, and iPod touch
®
are registered trademarks of Apple Inc.
PRODUCT OVERVIEW
1.
2.
3.
4.
5.
6.
Microphone
Volume Up / Skip
Track Button ( )
Multifunction
Button ( )
Volume Down / Previous
Track Button ( )
Status Indicator Light
Micro-USB
Charging Port
1.
2.
3.
4.
5.
6.
remote
WIRELESS SPORTS
IN-EAR HEADPHONES
Plus
Содержание X6 Plus
Страница 5: ...www MEEaudio com support MEEaudio com Plus...
