Medtrum TouchCare A7+ Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 145

background image

8

Store the Sensor at temperatures between 2°C (36°F) and 30°C (86°F), and at
humidity levels between 20% and 90% relative humidity for the length of the

Sensor’s shelf life. For temperatures greater than 30°C (86°F), the Sensor will

require cooled storage at temperatures no lower than 2°C (36°F). You may store
the Sensor in the refrigerator if it is within this temperature range. The Sensor
should not be stored in the freezer. Wait for the Sensor to warm to room
temperature before usage to prevent condensation. Storing the Sensor
improperly may cause the Sensor glucose readings to be inaccurate, and you
might miss a low or high blood glucose value.

Store the Transmitter at temperatures between -10°C (14°F) and 55°C (131°F),
and at humidity levels between 20% and 90% relative humidity. Keep the USB
charging cable and the Transmitter separate when in storage.

Store the Personal Diabetes Manager (PDM) at temperatures between -10°C
(14°F) and 55°C (131°F), and at humidity levels between 20% and 90% relative
humidity.

1.4.7 FCC Caution

Labelling requirements.

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.

Information to user.

Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.

Note:

This equipment has been tested and found to comply with the limits for a

Class  B  digital  device,  pursuant  to  part  15  of  the  FCC  Rules.  These  limits  are
designed  to  provide  reasonable  protection  against  harmful  interference  in  a
residential  installation.  This  equipment  generates  uses  and  can  radiate  radio
frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the
instructions,  may  cause  harmful  interference  to  radio  communications.
However, there is no guarantee that interference will not occur in a particular
installation.  If  this  equipment  does  cause  harmful  interference  to  radio  or

B ureau Veritas

«
...
17
18
19
20
21
...
»

Содержание TouchCare A7+


















































































































































Отзывы:

Нет отзывов

Похожие инструкции для TouchCare A7+

Бренд: Campbell Страницы: 18

Бренд: Vector Страницы: 4

Бренд: NARGESA Страницы: 33

Бренд: B-K lighting Страницы: 3

Бренд: ParaBody Страницы: 5

AquaPure Ei Series

Бренд: Jandy Страницы: 4

AquaPure Ei Series

Бренд: Jandy Страницы: 8

Jandy Pro Series

Бренд: Jandy Страницы: 16

Бренд: Oakworks Medical Страницы: 28

Бренд: Qlight Страницы: 4

Бренд: Zimmer Страницы: 54

Бренд: Zimmer Страницы: 4

Бренд: Zimmer Biomet Страницы: 23

Бренд: Zimmer Страницы: 16

Бренд: Zimmer Страницы: 2

Бренд: Zimmer Страницы: 32

Бренд: Zimmer Страницы: 96

Бренд: Ultrasonic Страницы: 33

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды