Medtronic PROTECTA XT DR D314DRG, Руководство для клиницистов

Страница: 71 / 508

Parameter interlock exists – When an interlock symbol appears next to a parameter
value, it indicates that the parameter value conflicts with the setting of another present or
pending value. Select another value or resolve the conflicting parameter value before
programming the parameter.
Parameter warning exists – When an exclamation point enclosed in a triangle appears
next to a parameter value, a warning message is available regarding that value. The
message can be viewed either by selecting the message button or by reselecting that
parameter. In the latter case, the warning is displayed as a warning note in the selection
window. These parameter values can be programmed.
Adaptive parameter – When the adaptive symbol appears next to a parameter value on
the Parameters screen, it indicates that the programmed value can be changed
automatically by the device. The symbol does not necessarily indicate that the parameter
value has been adapted from a previously programmed value, only that it is able to be
adapted.
Medtronic nominal parameter value – When the “n” symbol appears next to a parameter
value, it indicates that the value is the Medtronic nominal value.
Programmed parameter value – When the “P” symbol appears next to a parameter value,
it indicates that the value is the programmed value.
The programmer may display a message button next to the [PROGRAM] button that, when
selected, provides access to additional information about the pending parameters. The
message button has one of the symbols described in Table 3. When the message button
is selected, the programmer opens a second window displaying one or more messages.
Table 3. Symbols that appear on the message button
Symbol Explanation
Parameter interlock message
Parameter warning message
Parameter informational message
Parameter interlock message – This button indicates that a parameter interlock exists.
Programming is restricted until you resolve the conflict. Select this button for a message
that describes the conflict.
Parameter warning message – This button indicates that there is a warning associated
with programming one or more of the pending parameter values. Select this button to view
the warning message and recommendations.
Medtronic PROTECTA™ XT DR D314DRG
Clinician Manual 71