manualshive.com logo in svg

Medtronic PROTECTA XT DR D314DRG, Руководство для клиницистов

Поделиться
Скачать
Medtronic PROTECTA XT DR D314DRG Скачать руководство пользователя страница 19

1.2  System description

The Medtronic Model D314DRG Protecta XT DR dual chamber implantable cardioverter

defibrillator (ICD) is a multiprogrammable cardiac device that monitors and regulates the

patient’s heart rate by providing single or dual chamber rate-responsive bradycardia pacing,

ventricular tachyarrhythmia therapies, and atrial tachyarrhythmia therapies.
The device senses the electrical activity of the patient’s heart using the electrodes of the

implanted atrial and right ventricular leads. It then analyzes the heart rhythm based on

selectable detection parameters.
The device can automatically detect ventricular tachyarrhythmias (VT/VF) and provides

treatment with defibrillation, cardioversion, and antitachycardia pacing therapies. The

device can also automatically detect atrial tachyarrhythmias (AT/AF) and provides

treatment with cardioversion and antitachycardia pacing therapies. The device responds to

bradyarrhythmias by providing bradycardia pacing therapy.
The device also provides diagnostic and monitoring information that assists with system

evaluation and patient care.
Leads – The lead system used with this device must provide sensing, pacing and

cardioversion/defibrillation therapies to the right ventricle (RV) and sensing and pacing to

the atrium (A). Do not use any lead with this device without first verifying lead and connector

compatibility.
For information about selecting and implanting leads for this device, refer to Section 5.2,

“Selecting and implanting the leads”, page 111.
Implantable device system – The Model D314DRG Protecta XT DR along with pacing

leads and defibrillation leads constitute the implantable portion of the device system. The

following figure shows the major components that communicate with the implantable device

system.

Medtronic

PROTECTA™ XT DR D314DRG

Clinician Manual

19

Содержание PROTECTA XT DR D314DRG





























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды