Medline Excel K3 Basic, Руководство пользователя

Страница: 27 / 36

K4
To carry out the adjustment, loosen and remove
the screw at the bottom front of the frame, on
both sides (Open-ended spanner 8mm and Allen
key 3mm). Choose the desired height (every
15mm). Insert the screws in the next available
holes and tighten .
K3 and K4 - heigh mount footplate
To adjust the height of the heigh-mount footplate,
loosen the clamp binding screws on both frame
sides (Allen key 5mm). Adjust the height
(stepless) and tighten the screws again.
CAUTION: Make sure all screws are well
tightened after each adjutment.
Adjustment of the backrest height
Standard backrest
Push the backrest upholstery down, along the
back telescope until the snap-heads become
apparent, on the inside of the telescope tube.
Press the snap-head, until the tube slides out
of place. Adjust the telescope height and let the
snap-head engage into the next available hole.
Backrest with push handles
Push the backrest upholstery down along the
back telescope until the setting screws become
apparent. Loosen the screws on both sides (open-
ended spanner 8mm and Allen key 3mm).
Adjust the telescope height and insert the screws
into the next available holes. Tighten firmly.
Backrest
telescope
Backrest
upholstery
Push
handle
Side
guard
CAUTION: The push handles should be fixed to the backrest
telescope using screws, and not a snap head spring
system (for security reasons not adequate).
27
GB
k-Serie D_GB.p65 27.03.02, 11:41 27