User Manual TDO Sahara
5 Operation
5.1 Switching the device on
Press the mains switch on the rear of the Instrument. The TDO Sahara is now in standby mode, which
is indicated with a point in the display. The devices saves the latest switching state when it is turned
off with the mains switch, so this state will be activated when it is turned on again.
Press the Power Key (Figure 4 (8)) fort wo secounds to activate the TDO Sahara. The device is now in
default, where it shows the current temperature of the drying chamber.
5.2 Temperature Controller Elements and Functions
The temperature controller consists of eight elements.
Page 10
Rev. 01 (06/2013)
Medite GmbH . Wollenweberstr. 12 . 31303 Burgdorf . Germany
Phone +49 5136 88 84 0 . Fax +49 5136 88 84 55 . [email protected] . www.medite.de
(3)
(1)
(3)
Warning light „Hot surface“
(4)
Set-Time key
(5)
Set key
(6)
Up key
(7)
Down key
(8)
On/Off key
(2)
(2)
Digital display
(1)
Timer key
(8)
Figure 4
(7)
(4)
(5)
(6)
There is always a beep when you press a key. This beep does not indicate a
successful operation. Pay attention to the time designations for each feature.
5.2.1 Modes of Operation
The Slide Drying Oven can operate in two different modes.
The first mode is continuous operation, which means permanent heating. The previously chosen
temperature will be held constantly. The timer only has a help function with its acoustic signal.
The second mode relates to the timer. The device starts heating when the timer is activated with the
key.
To activate continuous operation, set the timer to
99:59
.
