P3V Veterinary Digital Ultrasonic Diagnostic Imaging System User Manual
- 106
-
To enter Height and Weight
1.
In the M-cardiac measurement menu, roll the trackball to highlight
Input
. Then
select the secondary menu
Height & Weight
and press
Set
to display a
Height and
Weight
entering dialog box, as shown below.
Figure 9-4 Height and Weight Input Dialog Box
2.
Select species from the pull-down menu and input suitable values in the Height and
Weight boxes.
3.
Roll the trackball to highlight
OK
and press
Set
.
The measurements and calculations of all the LV parameters are as below.
Measurement or input items:
Input or measurement: HR, LVET and animal’s Height & Weight;
Measurement: LVIDs and LVIDd
To calculate all the LV parameters:
Input or measure HR, LVET, and Height & Weight.
Measure LVIDs and LVIDd following the prompt instruction.
All the LV parameters, ESV, EDV, SV, FS, EF, CO, MVCF, SI and CI will be displayed in the
measured result window.
9.1.2. Mitral Valve
Mitral Valve calculation is as below.
Measurement items:
EF slope, ACV, A/E, DEV, and DCT
Mitral Valve measurement:
In the M-cardiac measurement menu, roll the trackball to highlight
Mitral
to display the
secondary menu.
