Important Safety Information
the glass.
Keep packaging materials away from children.
Store the Body Weight Scale BC800 3G hori-
zontally, not vertically.
If the measurement appears inaccurate or if
the LCD display does not show any fi gures,
please check that the batteries are correctly
inserted and the battery contacts are clean.
If the Body Weight Scale BC800 3G will not
be used for an extended period of time,
remove the batteries from the Weight Scale
BC800 3G and store it properly. Do not store
other objects on top of it.
Please use the device in a dry and clean envi-
ronment, and place the device on a fl at ground
before use.
Do not use hot water, volatile oil or rosin oil to
clean the scale.
Please store at room temperature, keep in a
dry and cool place and avoid sun exposure.
Do not run or jump near the Body Weight
Scale BC800 3G.
This product is applied parts(type BF).No
maintenance required during the product life
cycle.
Please read the entire instruction manual and
safety precautions before using the Body
Weight Scale BC800 3G.
Unusual measurement values should be dis-
cussed with your doctor or health care pro-
fessional.
Never change the dosage of any prescribed
medications without fi rst consulting your doc-
tor or health care professional.
Always perform the measurements on a hard
and fl at surface. Uneven fl oors may affect the
readings.
If necessary, clean the Body Weight Scale
BC800 3G with a damp cloth and a small
amount of dishwashing liquid. When the sur-
face is dirty.
Never immerse the scale in water or rinse it
under running water.
Protect the Body Weight Scale BC800 3G
against knocks, moisture, dust, chemicals,
drastic changes in temperature and electro-
magnetic fi elds.
Keep the Body Weight Scale BC800 3G away
from any sources of heat.
Never step on the outer edge of the glass.
This could cause the scale to tip or damage
→
→
→
→
→
→
→
→
→
→
→
→
→
→
→
→
→
Automatic Shutdown
If no measurement is being taken, the scale will automatically turn off in 10 seconds.
2. Operating Instructions
Place the scale on a hard, fl at surface.
Step on the scale and remain still during
measurement.
When the “data send in progress” indicator
is displayed, the data is being sent and you
may step off the scale.
01
02
03
After a period of time, the data send status
will be displayed. If it shows a “data send
failure”, move the scale to a new location
and try again.
04
Notes
→
Weight measurements are possible with shoes and socks on.
→
Calibration: if you place the body weight scale BC800 3G at new place, quickly step with one on
it, until the display turns on. Step off and wait until the calibration gets performed(10-15 seconds)and
the display switches off.
→
If there is no signal strength indicator and you continue to receive a data send failure, contact your
distribution partner.
→
user should clean the glass surface before use.
→
Please contact
for troubleshooting and maintenance.
