Medisana 40470, Руководство пользователя, Страница: 13 / 56

GB
9
3 Operation / 4 Miscellaneous
Never use aggressive cleaning agents or stiff brushes.
Do not allow any water to get into the unit. Do not immerse the device
in water. Do not use the unit again until it is completely dry.
Do not expose the unit to direct sunlight; protect it against dirt and
moisture.
This product must not be disposed together with the domestic waste.
Hand in a no longer required unit at a municipal or commercial collection
point so that it can be disposed of in an environmentally acceptable
manner.
Consult your municipal authority or your dealer for information about
disposal.
4.1
Care and
maintenance
4.2
Disposal
•
Use a mild household detergent and clean the surfaces only with a lightly
moistened cloth.
•
•
•
1. Place the scale on a stable, firm surface. All four feet must be touching
the floor. Uneven and soft flooring affects measuring accuracy.
2. Always weigh yourself on the same scale, at the same place and at the
same time. Weigh yourself without clothing, before meals, preferably in
the morning before breakfast.
3. If you stand with both feet on the scale, “ ” appears. 0.0 kg
The values change while your weight is beeing determined. When the
NOTE
If the scale has been transported or moved, you need to initialize it
before use. Therefore tap on the surface lightly with your foot.
The display shows “0.0 kg” (or “0.0 lb”). Wait, until the scale will
this procedure is not required.
3.2
Weighing
switch off. The scale is now ready. If the scale has not been moved,
measurement has stabilised, the display flashes twice and then finally
your weight is displayed. As long as you stay on the scale your measured
weight is displayed. Step down from the scale. The scale switches off
automatically after 8 seconds.
3.3
Change the
Unit of Weight
You may change the unit of weight of the Solar scale .
Turn the scale over and select the unit of weight (KG or LB) by pressing
the black changeover switch
.
MEDISANA PSS
2
3.4
Error messages
“LO”
“ERR”
The solar cells are not providing enough energy. Move the scale
to a brighter place and wait at least 10 minutes, before you use
the scale again, so that the solar cells can become charged.
The scale is overloaded.