Helpline No. UK/ North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: 82937
8
Using the headphones
6
Using this appliance at full volume for extended periods of time
may cause damage to the hearing capacity of the listener.
In the first instance set the volume of the audio device to a value at
the lowest end of the scale before you put on the headphones. Then
select a comfortable volume. Excessive volume can damage your
hearing.
Switch on
Turn on the audio source (TV set or any audio devices) which the transmitter has
connected.
Switch on the headphones.
Place the headphones on your head and adjust the volume to obtain the desired
sound level.
If you cannot find the best reception frequency, press the "Auto Scan" button on
the headphones to get the fine scanned channel.
You should then be able to move around freely from one room to another
without any interference. If interference does occur (interruptions in the
signal), press the "Auto Scan" button once to find a better reception channel.
A
For better stereo reception, stay approximately seven meters away from the
transmitter when you press the "Auto Scan" button.
B
If it is impossible to find a satisfactory frequency, change the channel setting
on your transmitter, then press the "Auto Scan" button on the headphones to
find the corresponding channel.
To protect the transmitter and to save power, the transmitter will automatically
switch off after approximately four minutes if there is no audio signal, or the
signal that it receives from the audio source is too weak for proper reception. If
the signal returns to an acceptable level, then the transmitter will automatically
switch back on.
