Medion P89625 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 112

background image

8

Telephone:

1300 884 987

Internet: www.medion.com.au

After Sales Support

• Keep a minimum clearance of approx. 10 cm between walls and the device

or mains adapter. Ensure adequate ventilation.

• Do not operate your device out of doors, as external inﬂ uences such as rain,

snow, etc., could damage the device.

• Maintain a distance of at least one metre to high frequency and magnetic

sources of interference (television, loudspeakers, mobile phones, etc.) to
avoid malfunctions.

• Large changes in temperature or ﬂ uctuations in humidity can cause

moisture build up within the device due to condensation, which can cause
an electrical short circuit.

Never carry out repairs yourself

If the plug, cable or appliance is damaged, immediately unplug the device from
the mains.
Do not start up the device if the device or cable show visible signs of damage,
or if the device has fallen down.

WARNING!
Never try to open and/or repair the device yourself. There is a
risk of electric shock!

In the event of a fault, please contact the Medion Service Centre to avoid
hazards.

Cleaning and maintenance

• Before you clean the device, always unplug the mains adapter from the

mains.

• Only use a dry, clean cloth for cleaning. Do not use chemical solutions and

cleaning products because these may damage the device’s surface and/or
inscriptions.

Data backup

• Please note! Back up your data on external storage media after each update.

We do not accept any liability for claims for compensation arising from loss
of data or any damages incurred.

Power supply

Please note: Even when the device is switched off, some parts of the device
are still energized. To interrupt the power supply to your device, or to safely
disconnect the device from the voltage, disconnect the device completely from
the mains.
• Operate the mains adapter only on earthed socket outlets with AC 100–240

V ~ 50 Hz. If you are unsure about the power supply at the setup location,
ask your local energy provider.

86517 EN ALDI AUS Content RC2.indd 8

86517 EN ALDI AUS Content RC2.indd 8

16.08.2012 09:14:48

16.08.2012 09:14:48

«
...
11
12
13
14
15
...
»

Содержание P89625

















































































































Отзывы:

Нет отзывов

Похожие инструкции для P89625

Бренд: IDT Страницы: 292

HazMat station EPO-2

Бренд: Denios Страницы: 6

Бренд: B&B Страницы: 55

Бренд: IEI Technology Страницы: 34

Ether-GSH24T v3

Бренд: AirLive Страницы: 2

SUPERSERVER 2048U-RTR4

Бренд: Supermicro Страницы: 152

Бренд: AIC Страницы: 105

ANR-C62-N1 Series

Бренд: Acrosser Technology Страницы: 57

Бренд: RaidSonic Страницы: 2

Бренд: SanDisk Страницы: 2

Бренд: SonicWALL Страницы: 56

Бренд: Inventec Страницы: 129

Бренд: Coactive Aesthetics Страницы: 30

G4-Apex-ENTERPRISE-HW

Бренд: Viavi Страницы: 8

Бренд: Atmel Страницы: 30

Бренд: Pepwave Страницы: 121

Бренд: NETGEAR Страницы: 2

Бренд: Link electronics Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды