Getting Started
Connecting
Remove the protective cover of the USB Flash Drive and connect the device with an available USB port.
The operating system will now recognize the USB Flash Drive and assign two available drive letters, one to the USB Flash Drive and
one to the card reader. You can only access one drive, if no microSD™ card is inserted. Now you can use the device like a mass storage
device (copy data, delete, etc.).
NOTE!
The shape of the USB stick may cause it to partially cover an adjacent USB port. Connect a USB extension in this case.
Removing USB Flash Drive
With some operating systems it may be necessary to sign off the device.
The installed USB Flash Drive is displayed in the taskbar. Right click with the mouse “Unplug or Eject Hardware”.
The instruction for device removal will follow.
Inserting a microSD™ card
Insert the microSD™ card until it locks. A picture on the USB Flash Drive shows how to insert the micro-
SD™ card properly without running the risk of damaging the card or the card reader. The card can be
accessed as an additional drive on your computer.
Removing a microSD™ card
In order to remove the microSD™ card you first have to dismount the USB Flash Drive. Disconnect the USB Flash Drive from the compu-
ter and press lightly on the back of the microSD™ card to remove it from the card reader.
NOTE!
Never remove a microSD™ card or the USB Flash Drive while programs are still accessing them. This could cause loss of data.
Customer Service
Errors and Possible Causes
USB Flash Drive is not recognized:
• Is the device connected correctly?
• Check in the Windows® device manager, whether the USB units are correctly linked. If necessary re-install the USB controller.
Data cannot be read / written:
• Did you format the USB Flash Drive with another computer? Different formats (FAT/FAT32/HFS) may be incompatible. Save the
data and reformat the USB Flash Drive with a compatible format.
Please note:
If the USB Flash Drive does not operate normally due to an electrostatic discharge, faulty data exchange or other error, please carefully
disconnect the USB Flash Drive and reconnect it.
Additional Support
If the suggestions in the above section have not solved your problem, please contact the service hotline and we will attempt to help
you solve the problem. Before you contact the Helpline, however, please have the following information available:
• How is your computer configured?
• What additional peripherals do you use?
• What messages, if any, appear on your screen?
• What software were you using when the error occurred?
• What steps have you already undertaken to solve the problem?
• If you have been given a customer number previously, please quote this.
II/07/12
Medion Service Center
Visonic S.A.
c/ Miguel Faraday, 6
Parque Empresarial "La Carpetania", N-IV Km. 13
28906 Getafe, Madrid
España
Hotline: 902196437
Fax: 914604772
E-Mail: [email protected]
www.medion.es
86726 EN ALDI ES QSG RC1.indd 2
86726 EN ALDI ES QSG RC1.indd 2
17.04.2012 10:01:03
17.04.2012 10:01:03
