Settings menu
Settings
Conditional Access
Language
Privacy Settings
Parental
Timers
Date/Time
Sources
Network/Internet Settings
Accessibility
Netflix
More...
Menu Item
Settings
CONDITIONAL
ACCESS
If you want to watch subscription channels, you must fi rstly register with the corresponding
provider. You will receive a Conditional Access Module (CA module) and a special card
from your provider after registration. You will fi nd information about the settings in the
documentation supplied with the module.
Install the CI components on your television in the following way:
Switch the television off and pull out the mains plug.
Insert fi rst of all the CI module into the slot on the side of the smart TV. Then insert the
card.
Please note that you may only insert or remove the CI module when
the device has been disconnected from the mains electricity network.
NOTICE!
Risk of damage!
The CI module or the television could be damaged if you attempt to use force
to insert the CI module.
− The CI module must be inserted correctly; it cannot be inserted if aligned
incorrectly.
Connect the television to the electricity supply, switch it on and wait for a moment until
the card is recognised.
Some CI modules require additional set-up steps, which you can carry out in the
CONDITIONAL ACCESS
menu.
If no module is inserted, the message
NO COMMON INTERFACE MODULE DETECTED
appears on the screen.
37
Via the OSD menu
