Medion MD 82572, Руководство пользователя

Страница: 21 / 42

Created 22.01.10 09:16:00
9
ES
EN
DE
Manual code search
Carry out a manual search as follows:

Switch the relevant device on manually.

Keep the desired source button ( TV1 , TV2 , SAT1 , SAT2 , DVD , VCR ,
AUDIO , TUNER , TAPE , AUX ) pressed for approx. 3 seconds until the red
LED remains permanently lit.

Press the VOL+ key several times successively, until the device that that is
intended to be used reacts accordingly. Please pay attention to the fact that a
video cassette must have been inserted in the case of a video recorder, so that
the replay function can function.

Check whether the other key functions of the device have also been carried
out, as soon as the device has reacted.
Press the VOL+ key again, to search for a different code, if this is not the case.

Press the corresponding source key briefly, to store the code, if most of the
keys on the remote function on the device.
Due to the considerable quantity of different code numbers, up to 350
different codes are pre-programmed per device type. In individual cases
it may be possible that only the most common main functions are
available. For some particular device models, the described method
may not lead to success.
Automatic search
If your device does not respond to the remote control, even though you have
tried all of the codes listed for your device type and the relevant brand, then try
using the automatic search. This will enable you to find codes for brands that
were not listed in the device Code List.

Switch the relevant device on manually.
 Direct the remote control to the device.

Keep the desired source button ( TV1 , TV2 , SAT1 , SAT2 , DVD , VCR ,
AUDIO , TUNER , TAPE , AUX ) pressed until the red LED remains
permanently lit.

The remote control starts the code search of the function "VOL+" after several
seconds and transmits all codes consecutively at 1-second intervals. The LED
will light up for each transmission. If the device is a CD player, tuner, tape
oder AUX device, the "power" signal will be transmitted.

Point your remote control at the desired device and press the relevant source
key to save the found code.
 Check whether most of the keys on the remote function with the device.
Restart the search for a code, if this is not the case.