S
S
E
E
T
T
T
T
I
I
N
N
G
G
U
U
P
P
9
C
ONNECTING THE
5.1
S
YSTEM
Please read the chapter "Safety and Service" starting on page 2 before
connecting your system.
1.
C
ONNECTING THE
L
OUDSPEAKERS
After having positioned the components connect the cables of the loud-
speakers. Use the drawing on page 6 and the table below as guide:
Loudspeaker
Connection at the 5.1 System ( p. 6)
Loudspeaker plug
Front left
5, FRONT L – RCA White
RCA black
Front right
6, FRONT R – RCA Red
RCA black
Rear left
7, REAR L – RCA White
RCA black
Rear right
8, REAR R – RCA Red
RCA black
Center
9, CENTER – RCA Yellow
RCA black
2.
C
ONNECTING THE
S
OUND
S
OURCE
Your 5.1 system can take input from a PC with 5.1 outputs, a DVD-player, or
another suitable source with the corresponding output connections.
Â
Tip:
1/8" stereo female plugs are required. When not available,
then adapters are required.
Â
Attention:
Digital connections are not supported and can dam-
age the device.
1.
Locate the output connections of the sound source (sound card, DVD-player) and
connect the device with the included cables. The connections are usually color-
coded.
The colors might slightly vary. Check the manual of your device as a safeguard.
Use below table as a guide:
Connection on the 5.1 system
(p. 6)
Connection on the source
2, Front R - RCA red
2, Front L - RCA white
1/8" stereo plug
3, Rear R - RCA red
3, Rear L - RCA white
1/8" stereo plug
4, Center C – white
4, Subwoofer – red
1/8" stereo plug
3.
C
ONNECTING THE
P
OWER
A
DAPTER
Connect the supplied power adapter to the AC In connector on your 5.1
system (see page 6,
)
11
) and insert the power plug into an easily acces-
sible power outlet.
Do not switch on the 5.1 system yet.
