Menu option
Setting
NETWORK CHANNEL
SCAN
Select between digital cable or DVB-T station groups. This searches for related
channels of the currently selected station. The information sent in this respect
depends on the selected channel and leads to different results.
The existing channel list is replaced when the network search is started.
ANALOGUE FINE TUNE
Here you can fi ne-tune analogue channels.
INSTALLATION SETTINGS
Here you can make additional installation settings.
STANDBY SEARCH
If the function is set to
ON
, the TV will search for available
stations while it is in standby mode. When the device fi nds new
or not yet available stations, a menu is displayed that you can
use to accept or reject the changes
DYNAMIC CHANNEL
UPDATE
If you select the
ENABLED
setting, the channel list is updated
automatically.
SIGNAL INFORMATION
Displays further data about the received signal.
FIRST TIME
INSTALLATION
This function correlates with the initial installation steps that occur after switching on
for the fi rst time.
Carrying out the initial installation again will reset all settings back to the Factory
defaults, including the PIN.
41
The menu system in detail