Medion MD 30036, Инструкция по эксплуатации

Страница: 14 / 157

Basic functions 13
DE
EN
NO
FI
DK
SE
Basic functions
Turning the LCD TV on and off
1. Put the main switch on the lower section of the television in the ‘
I
’ (ON) setting. The device will go into Standby Mode
and the display on the front will shine red .
2. Press either the
STANDBY
button on the device or on the remote to switch the device on.
3. You will switch the device back to the Standby Mode with the
STANDBY
button.
4. Put the main switch on the lower section of the television in the ‘
0
’ (OFF) setting, in order to switch the device off com-
pletely.
Navigating within the Menu
1. Press the
MENU
button [ 8 ], in order to activate the OSD.
2. Select the options from the Main Menu with the / directional buttons .
3. Confirm the option selected from the Main Menu and open the sub-menu with the / directional buttons .
4. Select the options from the sub-menu with the / directional buttons .
5. Confirm the option selected from the sub-menu in which you want to make changes or settings with the / direc-
tional buttons .
6. Set the required vale or make a different selection with the / directional buttons .
7. You will return to the superordinate Menu with the
MENU
button [ 8 ].
8. You will close the Menu and confirm the selection at the same time with the
EXIT
button [ 7 ].
Note
The Menu will close automatically if you do not press a button for longer than 15 seconds when operating the
OSD. However, you can vary the length of the display. Read the ‘Menu
SYSTEM
Menu’ on Page 19 for this.
Language setting
The OSD of your LCD TV is set to English in the delivery status. Set the OSD to the language that you require as follows:
1. Press the
MENU
button [ 8 ] on the remote control.
2. Select the
SYSTEM
Menu point (4th Menu point in the Main Menu strip on the left of the picture [
MAIN MENU
] with
the directional button .
3. Confirm with the directional button. The
SPLEEP TIMER
entry will be emphasized.
4. Select the
OSD LANGUAGE
Menu point with the directional button. The OSD Menu will be faded out and the
OSD
LANGUAGE ENGLISH
strip will appear on the screen.
5. Select the language that you require with the directional buttons.
6. Confirm your selection with the
OK
button. The OSD will appear.
7. Press the button
EXIT
[ 7 ], to exit the OSD menu.