Medion MD 21281, Инструкция по эксплуатации

Страница: 32 / 123

English
11
DE
EN
FR
ES
DK
NL
Operating elements
1 2 3 4 5 6
(Ill.: Front operating elements)
Ref. Button Description

You will start the OSD (On Screen Display) with this button. Press this button
again if you wish to leave the OSD.
+ Power block, when the OSD is not activated
+ OSD block, when the OSD is not activated
Hold the key combination until the bar displayed has moved from left to
right completely, to activate/de-activate the block. A corresponding message
will appear on the screen.

Select a parameter and reduce its value with this button, when the OSD is
switched on.
If you are not in the OSD: Direct call-up of the Contrast/Brightness menu.

Select a parameter and increase its value with this button, when the OSD is
switched on.
If you are not in the OSD: Direct call-up of the Contrast/Brightness menu.

Confirm the selection of the parameter to be changed with this button.
If you are not in the OSD: Automatic adjustment

You can switch the TFT monitor on or to the Standby mode with this button.

Operational display Shows the operational state. Please also refer to page 13.