5
Q
UICK
S
ETUP
Complete atomic clock setup using the below sequence as follows:
Outdoor Transmitter:
Remove the four screws from the back of the outdoor transmitter.
Insert two AA batteries into the outdoor transmitter (not included).
Select between Celsius and Fahrenheit.
Do not attempt to adjust the channel switch, this should be left at Channel 1 at all times.
Press
RESET
using a thin pointed object.
Secure screws.
Atomic Clock:
Insert two AA batteries into the Atomic Clock (not included).
Press
RESET
on the back of the unit; do not press any other buttons for ten minutes.
Before placing the outdoor transmitter and Atomic Clock at desired locations, during initial setup,
place the atomic clock as close as possible to the outdoor transmitter.
Ten minutes after inserting the batteries into the Atomic Clock, both the indoor and outdoor temper-
ature should show in the display of the atomic clock.
If the time signal has not been received, set the time manually (see “Setting the time manually”,
page 17).
Program your time, select year, date, etc. (see “Setting the time manually”, page 17).
Place outdoor transmitter and Atomic Clock at desired locations.
Atomic Clock MD 10954 US.fm Seite 5 Dienstag, 7. März 2006 7:53 07