Medion LIFE X17576, Руководство пользователя

Страница: 35 / 61

35
PROGRAMME
EDIT You will see the currently stored TV stations here. You can change the following
settings for each TV station.
DELETE
Select the TV station you want to delete and press the red button . The selected
TV station is then deleted.
DELETE ALL
To delete all channels, press the green button .
Answer the subsequent prompt with
YES
and press
O K
to delete all channels
from the list of channels. Otherwise, select
NO
.
MOVE
Select the TV station and press the yellow button . Press the

buttons to
move the TV station to its new position and press the yellow button again. The
other TV stations will be rearranged accordingly.
SKIP
Press the CH+/- buttons to select the TV station you want to skip when scroll-
ing through the TV station list and press the blue button .
You can still select this TV station via the number buttons.
FAVOURITE
To save a TV station to the favourites list, select it and press the
F A V
button.
Use the buttons on the remote control to call up the favourites list.
SIGNAL INFOR
MATION The signal information about the currently set TV station is displayed here.
This option is only available in DTV mode.
CI INFORMATION
CI+ If you want to watch subscription channels, you must first register with the
channel provider. Once you have registered, you will receive a Conditional Ac-
cess Module (CI module) and a special card from your provider. You will find in-
formation about the settings in the documentation supplied with the module.
Install the CI components on your television in the following way:

Switch the television off and pull out the mains plug.

First insert the CI module in the slot on the side of the Smart TV. Then insert
the card.
Please note: only insert or remove the CI module after you have dis-
connected the device from the power supply.
NOTICE!
Risk of damage!
The CI module or the television could be damaged if you at-
tempt to insert the CI module by force.

The CI module must be inserted correctly: it cannot be insert-
ed if it is the wrong way round.

Connect the television to the power supply, switch it on, and wait for a mo-
ment until the card is recognised.

Additional setup steps may be required for some CAM modules, which you
can complete in the
CI INFORMATION
menu.
OAD Activate/deactivate the Over Air Download option. In doing so, you enable
wireless software updates via DVB-C.
OAD SCAN
(only for DVB-C)
Start search for updated software via DVB-C.