Medion LIFE X14020, Руководство по эксплуатации

Страница: 19 / 82

EN
19
5.3. Inserting batteries in the remote control

Remove the battery compartment cover on the back of the remote control.

Insert two LR03/AAA/1.5 V batteries in the battery compartment of the remote control. Check
the battery polarity (see label on the bottom of the battery compartment).

Close the battery compartment.
NOTICE!
Risk of damage!
The remote control can be damaged by leaking batteries if not used for a long pe-
riod of time!

Remove the batteries from the remote control if the device is not going to be
used for a long period.
5.4. Connecting the antenna
Your smart TV processes different antenna signals.
You can input the following image signals to the television through the socket labelled
ANT. :
• Via analogue cable/an analogue house aerial
• Via a DVB-T2/ DVB-T
1
antenna or
• Via a DVB-C 1 connection (digital cable connection)

Insert the antenna cable either from the house aerial/analogue cable connection, a DVB-T anten-
na or the DVB-C connection in the antenna socket on the Smart TV.
You also have the option of connecting a digital satellite system to the socket labelled LNB .

Screw a coaxial antenna cable's F connector onto the connector on the satellite connection
(
LNB ) of the Smart TV.
1 This service must be available in your region.