Medion LIFE X14000, Руководство по эксплуатации

Страница: 23 / 80

EN
23
6.7.4. Satellite
If you have previously activated the reception type
SATELLITE
, you can now make settings for the
antenna type.

To set the antenna type, select one of the following antenna types:
−
DIRECT
: Select this antenna type if you have a single receiver and a satellite antenna. Press
the OK button and then choose the desired satellite (you can also call up the transponder list
using the blue button ). Afterwards, press the
OK
button again to start the search. After that,
decide whether or not the channel list should be loaded.
−
UNICABLE
: Select this antenna type if you have multiple receivers and a single-cable system.
Press the
OK
button and make all the necessary settings regarding
SATELLITE POSITION 1/2,
USER BAND
and
BAND FREQUENCY
(here you can also call up the transponder list using the blue
button ). Afterwards, press the
OK
button again to start the search. After that, decide whether
or not the channel list should be loaded.
−
DISEQC SWITCH
: Select this antenna type if you have multiple satellite antennas and a DiSEqC
switch. Press the
OK
button and activate the desired
DISEQC
switch
1  4
(here you can also call
up the corresponding transponder list using the blue button). Afterwards, press the
OK
but-
ton again to start the search. After that, decide whether or not the channel list should be loa-
ded.
During the search, the scan progress is displayed. In addition, the number of found TV and radio
stations is displayed.

Afterwards, press
OK
to continue.
At the end of automatic program storage, a TV programme is shown.
The initial installation described here corresponds to the
FIRST TIME INSTALLATION
op-
tion in the
INSTALLATION
menu
.